How to Calibrate Your Health O Meter Digital Scale
Contents
This guide will teach you how to calibrate your Health O Meter digital scale so that you can get the most accurate readings.
Checkout this video:
Introduction
If you want to make sure your Health o meter digital scale is providing accurate readings, you’ll need to calibrate it on a regular basis. Fortunately, the process for calibrating most Health O Meter digital scales is relatively simple and only takes a few minutes. By taking the time to calibrate your scale, you can ensure that it’s providing accurate readings so that you can maintain a healthy weight.
What You Need
In order to calibrate your Health o meter digital scale, you will need the following items:
-A weight that is heavier than the maximum weight capacity of your scale
-The manual for your digital scale
-A level surface on which to place your scale
Setting Up Your Scale
1. Unpack the scale from its packaging. Place it on a level surface in your bathroom or wherever you plan to use it.
2. Remove the battery compartment cover on the back of the scale using a coin or a flathead screwdriver.
3. Insert three AAA batteries into the battery compartment, making sure to align the positive and negative ends as directed by the printed diagram inside the compartment.
4. Replace the battery cover and screw it back into place with a coin or flathead screwdriver.
5. Stand on the scale barefoot and wait for the display to show “0.0.” If it does not, tap your foot lightly on the scale until it does.
How to Calibrate Your Scale
If your Digital Scale is not functioning properly, you may need to calibrate it. Please follow these steps to calibrate your scale:
1.Press and hold the power button to turn on your scale.
2.Place the scale on a hard, flat surface.
3.On the display, press and hold the “CAL” button for 3 seconds.
4.The display will show “CAL 0.0”.
5.Step on the scale and wait for the display to show your weight.
6.Press the “CAL” button to complete the calibration process.
Checking the Accuracy of Your Scale
It is important to check the accuracy of your scale frequently. You can do this by using a weight that you know the exact weight of. For example, a 5 pound weight. Place the 5 pound weight on the scale and see what it reads. If it reads 5 pounds then your scale is accurate.
If it does not read 5 pounds, you will need to calibrate your scale. To do this, you will need to find the calibration button on your scale. Once you have found the calibration button, press and hold it while you place the 5 pound weight on the scale. The scale should now read 5 pounds. If it does not, you may need to press the calibration button again or consult your Health o Meter digital scale manual.
Maintaining Your Scale
We all know that maintaining a healthy lifestyle requires regular exercise and eating a balanced diet. But did you know that to maintain your Health O Meter® Digital Scale, it’s important to calibrate it regularly?
